Stoner 20′ Abaco Skiff

The Stoner 20 Abaco Skiff is the perfect little boat for everyone. The boat comes with a built in insulated cooler under the console seat, A large dry storage compartment up front and holds 65 gallons of fuel and 20 gallons of fresh water. There are two batteries located in the console and still plenty of room for storage. The layout includes either the rear bench seat/splashwell, or a leaning post with two back jump seats. The boat was designed to be low maintenance, simple and easy to use. It is a great boat to tow, and custom tow eyes are a nice option. The Stoner 20 has Mercury, Suzuki, or Yamaha 115hp or 150hp 4 stroke power options and performs unbelievably efficient with any configuration. Base model starts at $57,000.

Pricing Info
*Base Model – $57,000

Includes
Bright White Gelcoat finish
Rear bench seat layout
Console with insulated cooler/ seat
65 gallon epoxy coated 3/8 aluminum fuel tank (EPA certified)
Group 27 batteries (2)
1500 gph rule bilge pumps w/ floatswitch
Dual Blueseas battery switch
Recessed Navigation lights and removable anchor light
5 – 6″ stainless steel cleats
Tow eye and transom eyes
Windshield 1/2″
Grab handles on console
Interior white trim with screws
Blueseas switch panel with led lights
Dual hatch lift on forward hatch
Lenco 9×12 stainless steel trim tabs – electric

Base Model Includes
Mercury 115hp 4-stroke 25″ shaft installed and rigged

*Center Console Model starts at $65,000
Center Console Model Includes
Leaning post
Center Console with insulated cooler/seat
Rear jump seats

Other Motor Options
Mercury 115hp or 150hp 4 stroke
Suzuki 115hp or 150hp 4 stroke
Yamaha 115hp or 150hp 4 stroke

Upgrades are unlimited as we are willing to accommodate everyone. Here are some other options we have installed:
Rear bench seat backrest from Birdsall Marine – $550
Hull color gel coat optional, interior color and non-skid optional – Depends on color scheme
Grab rails on side of console – $200
Forward seating option (custom casting platform with one large hatch) $3,650
Rod racks on forward bulkhead (PVC tubes) – $400
Bottom paint navy blue, epoxy barrier coat – $2,300
Lenco trim tabs – $860
Glove box on console (drop out angled) – $340
Hatch under rear seat – $150
Simrad NSS Evo3s 9″ – $2,499
Sound system complete with 4 speakers, amp, radio rca (fusion sig series) – $1,950
Forward deck fish box (insulated) – $500
8′ Bimini top sunbrella and accon deck mounts – $898
Underwater lights – $500
Under gunnel lights – $550
Single axle aluminum trailer – $4,350
V marine rod holders on gunnel – $460
USB charger in glove box – $52
Mercury vessel view 5″ screen (difference from gauges) – $647
Gas shocks on both hatches – $220
Dek It custom PVC foam floor – $3,500
Clips for anchor pole holder – $48

Stoner 20′ Photo Gallery

Other Models